Learn the next decision.
Straight flush and royal flush
This overview brings the relevant details together. A straight flush contains five consecutive ranks all in one suit. An ace-high straight flush, ten through ace, is called a royal flush. An ace can also be low in ace-two-three-four-five, but a sequence cannot wrap from king through ace to two. You can return to this explanation whenever you need a reminder.
Four of a kind — details
A useful starting point is the following overview. Four cards of the same rank form four of a kind, with one additional kicker. Compare the rank of the four matching cards first. If those four cards are shared on the board, the highest available fifth card can decide which player's five-card hand is stronger. Read this alongside the related information on this site.
Full house
Keep these details in view as you continue. A full house combines three cards of one rank with a pair of another rank. Compare the three-card group before the pair. If seven available cards contain two different three-card groups, use the higher group as the trips and two cards from the lower group as the pair. If a question remains, the FAQ form provides a way to contact the operator.
Flush — details
The following details clarify how this works. A flush contains five cards of one suit without requiring consecutive ranks. Compare the highest card, then the next highest as needed until a difference appears. Only the best five flush cards count, and one suit is never stronger than another suit. Use this explanation as a reference during your next visit.
Straight — details
The key details are straightforward. A straight contains five consecutive ranks with any combination of suits. The highest card determines its strength, except that an ace-low wheel is five-high. Duplicate ranks cannot occupy separate positions in the sequence, and six available consecutive cards still produce only a five-card hand. If a question remains, the FAQ form provides a way to contact the operator.
Three of a kind — details
Here is the context for this part of the site. Three cards of the same rank form three of a kind when the hand is not a full house or four of a kind. Two additional high cards act as kickers. A pocket pair matching a board card is often called a set, but the ranking category remains three of a kind. Use this explanation as a reference during your next visit.
Two pair — details
The following details clarify how this works. Two pair contains two cards of one rank, two of another rank and one kicker. Compare the higher pair first, then the lower pair, then the kicker. If seven cards contain three pairs, only the best two pairs and the best available fifth card make the final hand. If a question remains, the FAQ form provides a way to contact the operator.
One pair — details
A useful starting point is the following overview. One pair uses two cards of the same rank and three kickers. A higher pair beats a lower pair regardless of the kickers. When the pair ranks match, compare the remaining three cards in descending order until a difference determines the winner or an exact tie remains. A careful reading can help you distinguish the different situations.
High card — details
The explanation below covers the main points. When no stronger category applies, the best five available ranks form a high-card hand. Compare those cards from highest to lowest. An ace normally plays high, and the sixth or seventh available card cannot break a tie between identical five-card hands. A careful reading can help you distinguish the different situations.
Read the board before comparing — details
Here is the context for this part of the site. Hold’em always selects the best five cards from seven available at the river. A strong board can give several players the same full house, straight or flush. Your private cards help only when they improve the best five-card combination; merely holding a higher unused card does not win a tie. If a question remains, the FAQ form provides a way to contact the operator.